It may seem like a small component, but your prop shafts are critical to keeping your vehicle moving.
The first thing to check is the universal joints (U-joints).
Even a small amount of play will only get worse with time. As the wear increases, so does the movement, until eventually the joint fails.
We’ve experienced this ourselves.
A failed rear prop shaft forced us to continue the journey in front-wheel drive only. While that got us out of trouble, it meant placing all the drive load on the front differential—far from ideal on a heavily loaded overland vehicle.
Before every major trip:
-
Check every universal joint for play.
-
Inspect the sliding spline (where applicable).
-
Grease all grease nipples.
-
Look for missing circlips or signs of rust around the bearing caps.
-
Replace any joint that shows excessive movement—don’t wait for it to fail in the middle of nowhere.
Suspension & Steering
Africa’s corrugated roads are relentless.
Every kilometre places stress on your suspension and steering components, so take the time to inspect them thoroughly before you leave.
Check:
-
Shock absorbers for leaks or damage.
-
Coil or leaf springs.
-
Radius arm bushes.
-
Sway bar bushes and links.
-
Suspension bushes.
-
Steering damper.
-
All mounting bolts.
Any bush showing excessive wear, cracking or movement should be replaced.
If your vehicle has grease points, grease them properly before departure.
Everything underneath the vehicle should be tight, secure and free from unnecessary movement.
Steering Linkages
Steering components are not something to “keep an eye on.”
They need to be inspected.
Pay particular attention to:
-
Tie-rod ends.
-
Drag links.
-
Ball joints.
-
Steering box components.
There should be no excessive play.
We’ve had a tie-rod end fail on one of our own vehicles while returning from Zimbabwe.
Fortunately, we managed the situation safely, but it’s not something you ever want to experience.
A worn steering component can quickly become a serious safety issue.
If in doubt…
Replace it.
Tyres – Your Only Contact with the Ground
Your tyres are the only part of your vehicle touching the road.
Never underestimate their importance.
Good tread alone doesn’t mean a tyre is safe.
If a tyre is several years old, even with plenty of tread remaining, the rubber may have deteriorated.
Inspect every tyre carefully for:
-
Cracks in the sidewalls.
-
Cracks between the tread blocks.
-
Uneven wear.
-
Cuts or damage.
-
Bulges.
If you’re regularly driving at reduced tyre pressures—0.8 bar, 0.6 bar or lower in difficult terrain—the condition of the tyre becomes even more important.
Old or damaged tyres are far more likely to fail when running at low pressures.
Before every major expedition:
-
Check tyre age.
-
Balance all wheels.
-
Have the wheel alignment checked.
-
Inspect your spare tyres as carefully as the tyres on the vehicle.
A spare that’s ten years old isn’t much use when you really need it.
Tyre Pressure Monitoring Systems (TPMS)
If there is one modern accessory we highly recommend, it’s a Tyre Pressure Monitoring System (TPMS).
A TPMS provides continuous information on:
-
Tyre pressure.
-
Tyre temperature.
-
Slow punctures before they become blowouts.
Many experienced overlanders consider it an essential safety item rather than a luxury.
We agree.
Waypoint Tip
The further you travel from the nearest workshop, the more important preventative maintenance becomes.
Every hour spent inspecting your vehicle before departure can save days of delays, expensive recoveries and unnecessary stress later.