If there’s one area we see neglected time and time again, it’s the wheels.
Before every major overland trip, remove every wheel. It’s the only way to properly inspect the components that matter most.
Wheel Nuts & Studs
Start with the basics.
Check every wheel stud and wheel nut for signs of:
-
Stretching
-
Cracking
-
Damaged threads
-
Corrosion
-
Previous repairs
We’ve seen partially broken wheel studs go unnoticed until they failed on tour.
Don’t assume they’re fine because the wheel is still attached.
Brake System
With the wheels removed, inspect the entire braking system.
For vehicles with disc brakes:
-
Check brake pad thickness.
-
Inspect the brake discs for excessive wear or cracking.
-
Make sure the brake calipers move freely and aren’t binding.
For vehicles with rear drum brakes:
This is one of the most commonly overlooked maintenance items.
Many owners assume their rear brakes are working simply because the vehicle still stops.
Unfortunately, seized wheel cylinders are surprisingly common.
When this happens, your rear brakes may contribute very little braking effort, leaving the front brakes to do almost all the work.
Have the rear drums removed and check:
-
Wheel cylinders
-
Brake shoes
-
Springs
-
Brake adjusters
-
Any signs of fluid leaks
Don’t wait until you’re descending a mountain pass to discover your rear brakes haven’t been working for months.
Wheel Bearings
If there is one maintenance item we cannot emphasise enough…
Service your wheel bearings.
In our experience, wheel bearings are one of the most common mechanical failures on long overland journeys.
It’s not complicated maintenance.
Remove the hub.
Clean the bearings thoroughly.
Inspect them carefully for:
-
Wear
-
Pitting
-
Discolouration from heat
-
Roughness
-
Damage to the bearing races
Replace the oil seals if necessary and repack the bearings with a high-quality wheel-bearing grease before reassembly.
Many wheel-bearing failures could have been prevented with a simple inspection before departure.
💡 Waypoint Tip
Wheel bearings don’t usually fail without warning—they fail because nobody looked at them.
A few hours in the workshop before your trip can save days stranded beside the road waiting for parts that may be hundreds of kilometres away.
The Waypoint Philosophy
When preparing an overland vehicle, don’t focus only on what you can see.
The most important components are often hidden behind the wheels, inside the hubs and underneath the vehicle.
That’s where reliability begins.