Part 1: Electrical Systems & Engine Bay
One of the questions we’re asked most often around the campfire is:
“How do you prepare your vehicle for a long overland trip?”
After many years and hundreds of thousands of kilometres across Africa, we’ve developed our own routine. This isn’t the only way to prepare a vehicle, but it’s the system that has worked well for us.
Start with the Batteries
Your vehicle has two completely different jobs:
-
Starting the engine
-
Powering your camping equipment
These should ideally be handled by two separate battery systems.
Cranking Battery
Your starter battery must be in excellent condition before every major trip.
Before you leave:
-
Have it professionally load-tested.
-
Replace it if there is any doubt about its reliability.
-
A battery that works perfectly at home may fail after days of corrugations, heat and repeated starts in Africa.
This is one component we recommend having checked by a qualified auto electrician.
Auxiliary Batteries
Your auxiliary battery system deserves just as much attention.
This battery powers everything that makes camping comfortable:
-
Fridges
-
Lights
-
Chargers
-
Compressors
-
Coffee machines
-
Air fryers…
-
(Yes, we’ve seen almost everything!)
Unlike the starter battery, this isn’t simply an auto electrical installation.
A good overland electrical system should be designed by someone who understands overlanding, power consumption and battery management.
Our recommendation:
-
Consider Lithium Iron Phosphate (LiFePO₄) batteries instead of traditional lead-acid batteries where practical.
-
For longer expeditions, around 200Ah of usable battery capacity is a good starting point, depending on your equipment and power usage.
2. Inspect Every Electrical Connection
Corrugated roads are relentless.
A poor electrical installation might survive city driving but fail after several days on gravel roads.
Check:
-
Battery terminals are tight.
-
Lugs are correctly crimped.
-
All fuses are in good condition.
-
Carry spare fuses.
-
Wiring is properly secured.
-
Cables are sleeved where required.
-
Cable ties are intact.
-
Nothing should be able to vibrate or rub while driving.
Loose wiring eventually becomes broken wiring.
3. Recovery Equipment Starts with the Vehicle
Many overland vehicles have aftermarket bumpers fitted.
They’re heavy.
They’re strong.
But only if they’re mounted correctly.
Check that:
-
Recovery points are properly engineered.
-
Mounting bolts are minimum Grade 8.8 high-tensile bolts (or stronger where specified by the manufacturer).
-
Never rely on standard hardware-store bolts for recovery equipment.
During a snatch recovery, enormous forces are applied.
Incorrect bolts can fail catastrophically.
4. Check the Cooling System
A cooling system failure can end an expedition very quickly.
Inspect:
-
Radiator hoses
-
Heater hoses
-
Hose clamps
-
Expansion bottle
-
Radiator condition
-
Coolant level
Replace hoses that show signs of age, swelling or cracking.
Don’t wait until you’re in northern Zambia to discover a hose was ready to burst.
5. Service Before You Leave
If your vehicle is due for a service during the trip…
Service it before the trip.
For example:
If your service interval is 10,000 km and your tour will cover 4,800 km while you only have 5,000 km remaining before the next service…
Do the service first.
It gives your mechanic the opportunity to identify problems before they become breakdowns in remote areas.
6. Don’t Forget the Driveline
If your vehicle regularly tackles:
-
Water crossings
-
Mud
-
Deep sand
-
River crossings
Then don’t only service the engine.
Also inspect:
-
Front differential
-
Rear differential
-
Transfer case
-
Gearbox
Water contamination is surprisingly common after deep crossings.
Fresh oil is significantly cheaper than replacing driveline components.
7. Cooling Isn’t Just About Cold Weather
Many people think coolant is simply antifreeze.
It isn’t.
Quality coolant helps:
-
Control operating temperature
-
Lubricate the water pump
-
Protect internal components from corrosion
-
Raise the boiling point
-
Lower the freezing point
Always use the correct coolant mixture recommended for your vehicle.
Never rely on plain water for extended overland travel.
Final Thought
Vehicle preparation isn’t about spending more money.
It’s about reducing the chances of something small becoming something expensive hundreds of kilometres from the nearest workshop.
The better you prepare at home, the more you’ll enjoy the adventure once you’re out there.
Coming next: Tyres, bearings, brakes and recovery equipment.
Use the Right Specialist
Many people assume an auto electrician is the right person for every electrical job on an overland vehicle.
They’re not.
An auto electrician is an expert in vehicle electrical systems.
An overland electrical installer is an expert in designing power systems that support extended travel and camping.
If you’re installing dual batteries, solar systems, DC-DC chargers, inverters or power management systems, make sure the installation is done by someone who understands overlanding—not just automotive wiring.
A well-designed system should be:
-
Neatly routed
-
Properly fused
-
Securely mounted
-
Protected against vibration
-
Easy to inspect and maintain
A tidy installation isn’t just about appearance—it greatly improves reliability on long, corrugated African roads.
Waypoint Tip
Corrugated roads are the biggest enemy of an overland vehicle.
Before every major trip, physically put your hands on every battery terminal, fuse holder, electrical connection and mounting bolt. If something can move, it eventually will. Finding it in your driveway is far better than finding it in the middle of the Kalahari.